Bringing Legacy MEMS Fab Tools Into the Smart Factory, Without Touching the Tool PC
Client: U.S.-based MEMS microfabrication foundry
Solution: EIGEMBox hardware-based SECS/GEM connectivity
Industry: MEMS and microfabrication (contract foundry)
The Challenge
MEMS foundries run high-mix, low-volume processes on specialized, long-lived tools: etch, bonding, deposition, lithography, metrology. The client’s 6 legacy tools had no SECS/GEM interface and no vendor support.
- The host could not collect data, send recipes or issue commands
- Manual logging slowed traceability and risked wrong-recipe runs
- No vendor upgrade path
- Installing software on tool PCs risked warranty and production stability
The Solution
Einnosys deployed its EIGEMBox, a plug-in hardware unit that adds SECS/GEM capability to equipment without installing software on the equipment controller. The EIGEMBox connects to the tool’s available signals and data points and presents a standard SECS/GEM interface to the factory host.
The project followed four steps:
- Audit each tool’s available signals and data points
- Map events, alarms and process data to the GEM standard
- Configure and validate against the client’s host system
- Train the client’s engineers to maintain the setup
The Results
- 6 tools connected to the host in 4 weeks, with no changes to the controller PC
- Manual data entry reduced by 80%
- Equipment states and alarms visible in real time at the host
- Automatic lot-level traceability for customer audits